3com caller ID

[m1b9]

I need some help with the caller id function on the nbx750.
I can only get 4 digits to appear on the dialed phone.
My phone company requires 10 digits within the caller id because of in-state 800 lines.
I can manipulate how many digits are dialed but no matter what i try I cannot get more that 4 digits of the caller id to come through.

Anybody have any ideas?

Thanks

 

[donbru01]

If you have a ISDN LIne you can using Pretranslator for cli , give me your internal extension and give me correct digit to transmit to local co .

bye

 

[m1b9]

Thank you for responding.

Yes it is an ISDN PRI line.
We have a range of extensions but an example of an internal 4 digit which is also on of our DID numbers is 6000
I need to send (example 4062516000 ) in the cli.

Thanks for your time.

Here is a portion of outdial plan.

/ Route Description
/ ----- -----------
DestinationRoute Create 1 LocalCO
DestinationRoute Create 3 Voice Application
DestinationRoute Create 4 Attendant
DestinationRoute Create 5 H323 ConneXtions Ports
DestinationRoute Create 8 Redirect 272 to appear local
DestinationRoute Create 10 LocalCO Qwest nostrip
DestinationRoute Create 12 Redirect 6113 Registration
DestinationRoute Create 16 Redirect Library Call Group
DestinationRoute Create 17 UCN International
DestinationRoute Create 18 UCN Long Distance
DestinationRoute Create 22 Cisco Bresnan Trunk

/ Route Entry DestinationExtension
/ ----- ----- --------------------
DestinationRouteEntry Create 1 1 *0001
DestinationRouteEntry Create 3 1 *0003
DestinationRouteEntry Create 4 1 6000
DestinationRouteEntry Create 5 1 *0005
DestinationRouteEntry Create 8 1 *0010
DestinationRouteEntry Create 10 1 *0009
DestinationRouteEntry Create 12 1 4953
DestinationRouteEntry Create 16 1 4955
DestinationRouteEntry Create 17 1 *0010
DestinationRouteEntry Create 18 1 *0010
DestinationRouteEntry Create 22 1 *0012

/ Route Entry OperId Operation Value
/ ----- ----- ------ --------- -----
DestinationRouteOperation Create 8 1 1 prepend 1406
DestinationRouteOperation Create 17 1 1 stripLead 1

/////////////////////////////////////////////////////////////////////////////////
/ Pretranslators
/////////////////////////////////////////////////////////////////////////////////

PreTranslator Create 1 6000 DID to 6000 Internal
/ PreTransId Entry Digits
/ ---------- ----- ------
PreTranslatorEntry Create 1 1 *
PreTranslatorEntry Create 1 4 6111


/ PreTransId Entry OperId Operation Value
/ ---------- ----- ------ --------- -----
PreTranslatorOperation Create 1 1 1 stripLead 1
PreTranslatorOperation Create 1 1 2 stripTrail 1
PreTranslatorOperation Create 1 4 1 replace 6000

/ End of configuration

 

[donbru01]

OK perfect you create new Pretranslator

PreTranslator Create 5 Cli Outogoing
/ PreTransId Entry Digits
/ ---------- ----- ------
PreTranslatorEntry Create 5 1 6

6 is the first digit your internal number plan ( 6000-6999)

create digit manipulation

PreTranslatorOperation Create 5 1 1 prepend 406251

in this case 6000 call cli is 4062516000 , 6002 call cli is 4062516002 and so on
or

PreTranslatorOperation Create 5 1 1 replace 406251600

in this case 6000 call cli is 4062516000 , 6002 call cli is 4062516000 and so on

PreTranslatorISDNNumberType 5 2

This is important request your carrier , example in USA is 0 = unknown , in Italy is 2 = National is according with carrier

nISDNNumberType types for ETSI are as follows: (0, default) unknown;
/ (1) international; (2) national; (3) network; (4) subscriber


Then in netset is particolary configuration , select pretranslator device using cli ( select pretranslator CLI OUTGOING ) and insert only isdn trunk .

bye

 

[m1b9]

Thank you, that got it.
I sure appreciate your time.