poisondwarf
MIS
I'm trying to get my head round setting up 2 new VLANs on my LAN. Currently have a 3Com 2426 PWR Plus connected to a Netgear GSM7352S (via fibre modules at each end).
I would like to create 2 VLANs on the 3COM. The first comprising the fibre port and 6 ports the second comprising the fibre and 3 different ports. The reason for this is to separate 3 wireless AP's (2nd VLAN) from the rest of the traffic.
Not sure whether to use tagged or untagged for which VLAN. When I tried using untagged I lost communication with the switch entirely and had to reset to factory defaults.
The ultimate goal is to create a VLAN on the entire network purely for the wireless AP's and the one server (on the netgear) that wireless devices need to access and another VLAN for the non-wirless devices
I would like to create 2 VLANs on the 3COM. The first comprising the fibre port and 6 ports the second comprising the fibre and 3 different ports. The reason for this is to separate 3 wireless AP's (2nd VLAN) from the rest of the traffic.
Not sure whether to use tagged or untagged for which VLAN. When I tried using untagged I lost communication with the switch entirely and had to reset to factory defaults.
The ultimate goal is to create a VLAN on the entire network purely for the wireless AP's and the one server (on the netgear) that wireless devices need to access and another VLAN for the non-wirless devices