3920 Group Calling and Auto Dial Page feature not working. 1

[DanDal]

Has anyone had experience with using the Group Calling and Auto Dial Page features on a 3920 Wireless phone? When using these features on an 18btn Partner phone it will beep and then open the speaker allowing you to speak and have the receiving side reply hands free if the MIC button is on. This is not working on the 3920 set. I was only able to locate the following information in the Partner ACS installation doc on page 8-45. "If some extensions in a Calling Group have single-line, MLC-6, or TransTalk 9000-series telephones, those extensions are not signaled for voice-paged calls to the group (because they do not have built-in speakers). The 3920 has a speaker phone so I am not sure why this is not working. Any help would be appreciated.

Thanks.

 

[TouchToneTommy]

It's not that kind of speaker phone, that you can access with Intercom *-XX. So take it out of any calling groups that you voice announce to, and if anyone has an auto intercom button directed to it, be sure that it is programmed as a RINGING button, not a voice announce button.

 

[DanDal]

Thanks Tommy I will do that.