Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3904 set has an "L" before the dn

Status
Not open for further replies.

citypbxman

Technical User
Oct 17, 2005
13
US
I had programmed a remote 3904 working on a 9150 gateway for key 5 scr xxxxx. The set did not change and the programmed key will not ring. I went to the set and key 5 display reads Lxxxxx. Any input?
 
Everything else works on the set? You just added key 5 scr xxxx and it doesn't work, correct?
 
I think I remember this issue now. The "L" means that key is configured for a local calling key. On the 9150 you could plug in a local POTS line and have it appear on the digital set. You may have to go into Configuration Manager to remove that feature.
 
In the 9150 Port Configuration Screen, click on configure for that port. Then it will open up a new window and you will see at the bottom where the local call keys are configured.
 
Thank You. This is enough direction to correct this .
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top