Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3904 KBA No Display

Status
Not open for further replies.

stsironr

Vendor
Jan 19, 2005
30
US
I'have added a KBA module on a 3904 set.
Program LD 11 KBA 1. TNB shows key 32 through key 53
Program any of the 32 to 53 keys SCR/BFS/ADL XXXX Keys are dead. No display is there something I'am missing something?
Thanks Ron
 
reload firmware.. which should not be needed.. your software is done, no other entries.. and it can be hardware..

john poole
bellsouth business
columbia,sc
 

are you sure you have the ribbon plugged into the right port on the phone? i made that mistake once.


Scott Williams

IT, United States Coast Guard.
 
KBA is a Key Based Add-on. Key Based Add-ons you have to print the Key ID like 2616/2008 Phones ansd place the paper whith the key information under the key cover.

DBA is a Display Based Add-on. Display Based Add-on Display the Key Information like any 3900 series Phone.

If you are using a Display Based Phone you need to change the KBA 1 to DBA 1.

Good Luck
L.A. CityTech
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top