3902 external forwarding

[unclebrian78]

i am needing to forward this extension at night to a answering service, i thought i had it, but i was wrong.
when you press the call forward button it say release and try again. any suggestions?
REQ: prt

TYPE: 3902



TN 10 11

DATE

PAGE

DES


DES 3
TN 010 0 00 11
TYPE 3902
CDEN 8D
CUST 0
FDN 2621
TGAR 0
LDN NO
NCOS 3
SGRP 0
RNPG 10
SCI 0
SSU
XLST
CLS UNR FBD WTA LPR PUA MTD FNA HTA ADD HFA GRLD
MWD LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LND CNDD
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUA DPUD DNDD CFXA ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN
CDMR
CPND_LANG ENG
RCO 0
HUNT 2621
LHK 0
PLEV 02
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 2296 0 MARP
CPND
NAME CLINIC
XPLN 13
DISPLAY_FMT FIRST,LAST
01
02
03 CFW 16
04 TRN
05
DATE 17 JUN 2008


NACT

 

[tnphoneman]

Can you dial the night service from that phone?

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.

 

[GHTROUT]

And are you entering 9+the entire number to forward to, just as you would dial it from the phone

GHTROUT.com | FAQs | Recent Replies

 

[unclebrian78]

yes i can dial fine. when the handset is on hook and i press the call forward key the display says release and try again, if the handset is off hook and i press the call forward key and put the number in it calls the number like normal without even noticeing that i pressed the call forward key.

 

[ALJ5676]

Try putting CFW on a different key. I have it on key 1 on all my 3902s.

 

[tnphoneman]

Can you forward internally? Sounds like a set problem if you get release and try again right away.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.

 

[unclebrian78]

same result on a different key. and yes i am dialing 9 and the number

 

[unclebrian78]

changed button and no change

 

[phonz1]

your post doesnt show any cfw number

 

[unclebrian78]

you mean a number behind the key? it will not let me put a number in when i hit the call forward button

 

[tnphoneman]

Can you forward internally?

Try programming the number you want to forward to when you program the key on the set. It still sounds to me like it is a set problem and not a programming. Try another set.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.

 

[phonz1]

I agree with TN. When you print out a set, the CFW X always shows the number if one is programmed on that key. If you are unable to do it from the set, you can do it in CLI ie:

key xx cfw x 918005551212