Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3825 & AIM-CUE

Status
Not open for further replies.
MJ6

MJ6

IS-IT--Management
Nov 19, 2002
54
GB
I have installed a AIM-CUE module into a Cisco 3825 and the AIM0 LED on the front of the router is amber (not functioning). Any ideas?
 
Sort by date Sort by votes
Probably becuase it is no using the AIM module. I must admit I am not familiar with the LED usage on the 3800 but I am familiar with the AIM-CUE in 1 3700 series. Is it working?

It is what it is!!
__________________________________
A+, Net+, I-Net+, Certified Web Master, MCP, MCSA, MCSE, CCNA, CCDA, and few others (I got bored one day)
 
Upvote 0 Downvote
There was an issue with which AIM slot you put the CUE module in on some of the ISR's. Do you have it in the correct slot??
 
Upvote 0 Downvote
Wasn't fully connected. Thanks for replies. Sorry to waste your time.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Diya Freahat
  • Locked
  • Question
called name between avaya I P office & CUCM via SIP trunk
Replies
1
Views
173
Diya Freahat
Diya Freahat
DTGMI
  • Locked
  • Question
Nortel to Cisco VG310 & 4431 SIP GWs
Replies
0
Views
83
DTGMI
DTGMI
bitobito
  • Locked
  • Question
Stand alone Unity & cti route points
Replies
4
Views
92
gnrslash4life
gnrslash4life
ReallyRotten
  • Locked
  • Question
CME/CUE - Auto Attendant manual on/off
Replies
0
Views
54
ReallyRotten
ReallyRotten
ReallyRotten
  • Locked
  • Question
CUBE & Internet SIP
Replies
8
Views
92
gnrslash4life
gnrslash4life

Part and Inventory Search

Sponsor

Back
Top