jesselee63
Technical User
just upgraded from Intel Celeron 400Mhz to Intel Celeron 950Mhz and it won't work I think I need to change jumper and DIP switch settings on my 370SP CPU converter card can someone tell me
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
370SP CPU converter card DIP switch and jumper settings
- Thread starter jesselee63
- Start date
- Status
I would think the Celeron had a front side bus of 66mhz where as the new 950 likely is 100fsb.
The adjustments I would think are on the motherboard but you first need to know that it will support a 950@100 so you will need to check on the manufactures website.
Older boards had jumper adjustments for:
Front side bus
CPU core voltage (so check what it says on the CPU)
Clock multiplier
SO for a 950 with 100fsb the clock multiplier is probably:
9.5 X to get the 950mhz
Download and read the motherboard manual carefully.
Martin
We like members to GIVE and not just TAKE.
Participate and help others.
The adjustments I would think are on the motherboard but you first need to know that it will support a 950@100 so you will need to check on the manufactures website.
Older boards had jumper adjustments for:
Front side bus
CPU core voltage (so check what it says on the CPU)
Clock multiplier
SO for a 950 with 100fsb the clock multiplier is probably:
9.5 X to get the 950mhz
Download and read the motherboard manual carefully.
Martin
We like members to GIVE and not just TAKE.
Participate and help others.
- Status
Similar threads