Hello,
Tried deploying (5)3641's on IPO 9.0.5 this weekend. I've been through all the posts, all the manuals, and I'm very aware of what a pain these things are. I'm using the latest software/firmware builds available on the AVPP, 3641's, and the HAT Tool.
AVPP:
SVP Type: 010
Hardware Versions: 33/02
Factory Page: 213.001
Downloader: 71.005
Table of Contents: 173.040
Functional Code: 174.040
File System: 175.040
3641's:
117.058
HAT Tool:
4.1.4.0
Customer's AP is a Cisco AIR-SAP2602i-A-K9, and according to the Avaya doc's, this is compatible.
He is using these settings:
Security: WPA2-Personal
Encryption: AES 256 bit with TKIP
We've tried all settings possible just about, and no matter what we do, these phones will not recognize the AP's. Connecting with laptops and smart phones works every time with the AP's. We also tried configuring a phone manually, bypassing the HAT Tool, just to exhaust all possible snags. Phone boots and goes immediately to "No APs", regardless of what we try.
The main problem we are having, and I can't seem to get around it, is the "Static PSK(Pre Shared Key hex mode)" field is demanding a 64 character entry. This doesn't seem correct to me. Plus, just for fun we tried entering a 64 character key but the Cisco AP indicates that the max is 63 characters(of course). Even if we change it to "Pass Phrase", it is still requiring us to enter a 64-character PSK.
Any help is appreciated.
Thank You.
Tried deploying (5)3641's on IPO 9.0.5 this weekend. I've been through all the posts, all the manuals, and I'm very aware of what a pain these things are. I'm using the latest software/firmware builds available on the AVPP, 3641's, and the HAT Tool.
AVPP:
SVP Type: 010
Hardware Versions: 33/02
Factory Page: 213.001
Downloader: 71.005
Table of Contents: 173.040
Functional Code: 174.040
File System: 175.040
3641's:
117.058
HAT Tool:
4.1.4.0
Customer's AP is a Cisco AIR-SAP2602i-A-K9, and according to the Avaya doc's, this is compatible.
He is using these settings:
Security: WPA2-Personal
Encryption: AES 256 bit with TKIP
We've tried all settings possible just about, and no matter what we do, these phones will not recognize the AP's. Connecting with laptops and smart phones works every time with the AP's. We also tried configuring a phone manually, bypassing the HAT Tool, just to exhaust all possible snags. Phone boots and goes immediately to "No APs", regardless of what we try.
The main problem we are having, and I can't seem to get around it, is the "Static PSK(Pre Shared Key hex mode)" field is demanding a 64 character entry. This doesn't seem correct to me. Plus, just for fun we tried entering a 64 character key but the Cisco AP indicates that the max is 63 characters(of course). Even if we change it to "Pass Phrase", it is still requiring us to enter a 64-character PSK.
Any help is appreciated.
Thank You.