3640 Configuration

[DanielBowen]

I have a Cisco 3640 router with two controller E1 interfaces. This is going to be connected to an ISDN 30 line that I have just had installed with a FE interface connected to our internal LAN. Now all we are doing is allowing users to dial in via this router.

What I want to know, is how do I go about configuring the E1 interfaces? I have had a look on the Cisco website but got confused as they started talking about cas-custom commands and ds0 groups.

Can somebody please give me it in basic terminology as to what I would need to do?

Thanks very much

Daniel Bowen,

 

[workaholic24x7]

controller T1 1/0/0:1
> framing esf
> pri-group timeslots 1-24 nfas_d primary nfas_int 0
nfas_group 1
>!
>controller T1 1/0/0:2
> framing esf
> pri-group timeslots 1-24 nfas_d backup nfas_int 1
nfas_group 1