I put 4 serial WIC in the 3620 and configured it to be a frame relay switch. The ports are s0/0, 0/1, 1/0, ands 1/1.
Only port s0/0 will come up and the others are line and protocol down. I double checked the configuration but I don't know what else. The configuration must be OK since s0/0 is up.
the router has 64M dram and 16MB flash ard running 12.3 (9) non interprise IOS.
frame relay switching
intf-dce
lim-type ansi
frame relay route xxx int s0/1 xxx
Only port s0/0 will come up and the others are line and protocol down. I double checked the configuration but I don't know what else. The configuration must be OK since s0/0 is up.
the router has 64M dram and 16MB flash ard running 12.3 (9) non interprise IOS.
frame relay switching
intf-dce
lim-type ansi
frame relay route xxx int s0/1 xxx