Hi
We've recently bought some 3584 libraries but have hit a strange problem when checking tapes out.
Our library manager controller TSM server checks out tapes without a request being issued.
However our other server (not LMC) will not check a tape out without first loading it into a drive to verify, then issuing a request on the LMC which is then answered by
reply <req_no>
Added to that when we put returned tapes from vaultret into the hopper that have expired the library accessor scans the tapes and leaves them in the hopper. Our 3494 scanned them and took them into the library.
Is there something that needs setting up on the server that isnt the LMC to tell it not to load each tape in,not to request that its to be unloaded and also to scan and load the tapes in???
A lot of questions but its very frustrating.
We've recently bought some 3584 libraries but have hit a strange problem when checking tapes out.
Our library manager controller TSM server checks out tapes without a request being issued.
However our other server (not LMC) will not check a tape out without first loading it into a drive to verify, then issuing a request on the LMC which is then answered by
reply <req_no>
Added to that when we put returned tapes from vaultret into the hopper that have expired the library accessor scans the tapes and leaves them in the hopper. Our 3494 scanned them and took them into the library.
Is there something that needs setting up on the server that isnt the LMC to tell it not to load each tape in,not to request that its to be unloaded and also to scan and load the tapes in???
A lot of questions but its very frustrating.