I am installing Tivoli Storage Manager 5.1 with a single 3581 Ultrium Tape Library on AIX 4.3.3. I have successfully defined the library, the path to the server, the drive, and the path to the drive. (See commands below). Yet, when I go to label the tapes in the library, I keep getting 0 volume(s) labeled, 0 volume(s) checked-in. (see command below) Any suggestions? Also, any tips on an easy way to rotate tapes in this library with only 7 I/O loader slots would be appreciated.
DEFINE LIBRARY 3581lib_lb LIBTYPE=SCSI SHARED=no
DEFINE PATH tsm1_srv 3581lib_lb SRCTYPE=SERVER
DESTTYPE=LIBRARY DEVICE=/dev/smc0 ONLINE=YES
DEFINE DRIVE 3581lib_lb 358100_dr ONLine=yes ELEMent=82
CLEANFREQuency=ASNEEDED
DEFINE PATH tsm1_srv 358100_dr SRCType=SERVer
DESTType=DRive LIBRary=3581lib_lb DEVICE=/dev/rmt1
ONLINE=YES
label libvol 3581lib_lb search=yes labelsource=prompt checkin=scratch overwrite=yes
Also tried:
label libvol 3581lib_lb search=bulk labelsource=prompt checkin=scratch overwrite=yes
DEFINE LIBRARY 3581lib_lb LIBTYPE=SCSI SHARED=no
DEFINE PATH tsm1_srv 3581lib_lb SRCTYPE=SERVER
DESTTYPE=LIBRARY DEVICE=/dev/smc0 ONLINE=YES
DEFINE DRIVE 3581lib_lb 358100_dr ONLine=yes ELEMent=82
CLEANFREQuency=ASNEEDED
DEFINE PATH tsm1_srv 358100_dr SRCType=SERVer
DESTType=DRive LIBRary=3581lib_lb DEVICE=/dev/rmt1
ONLINE=YES
label libvol 3581lib_lb search=yes labelsource=prompt checkin=scratch overwrite=yes
Also tried:
label libvol 3581lib_lb search=bulk labelsource=prompt checkin=scratch overwrite=yes