JimiRaveon
IS-IT--Management
I bought a 355A adapter and tried to hook it up. It's a 25 pin connector. Do I need to buy a 25 to 9 pin adapter to get it to work?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
355A Adapter Com Port
- Thread starter JimiRaveon
- Start date
- Status
The connections are as follows
RJ45 (9Pin Female)
1 9
2 8,6,1
3 4
4 5
5 2
6 3
The SMDR/Admin pin out is as follows.
Using a RJ45:
-Pin 1- Not used
-Pin 2- DSR= DATA SET READY
-Pin 3- DTR= DATA TERMINAL READY
-Pin 4- GRD= GROUND
-Pin 5- RxD= RECIEVE DATA
-Pin 6- TxD= TRANSMIT DATA
-Pin 7- RTS= REQUEST TO SEND
-Pin 8- Not Used
A 355AF adapter just takes a RJ45 to a 25 pin interface
RJ45 (9Pin Female)
1 9
2 8,6,1
3 4
4 5
5 2
6 3
The SMDR/Admin pin out is as follows.
Using a RJ45:
-Pin 1- Not used
-Pin 2- DSR= DATA SET READY
-Pin 3- DTR= DATA TERMINAL READY
-Pin 4- GRD= GROUND
-Pin 5- RxD= RECIEVE DATA
-Pin 6- TxD= TRANSMIT DATA
-Pin 7- RTS= REQUEST TO SEND
-Pin 8- Not Used
A 355AF adapter just takes a RJ45 to a 25 pin interface
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question