350 Phaser - lists service required

[minkymu]

Please help. I just bought a used Phaser 350 off the Ebay, but the blasted thing won't start. After power up I get some rather noisy sounds followed by this code:

"Service Required" 07, 004.46:20430. Please wait.

Please help.

Thanks!!

 

[ari014]

Hi,

Code means: No transitions are observed of the drum maintenance cam sensor. The sensor may be bad or the drum maintenance cam may be jammed.

My guess: parts may have moved/loosen during transport. Open and check.

BR,
Ari

 

[Engleberth]

Ensure you have unlocked the Head Transport Lock as a first pass - second if you do open the unit check that there no Ink spillage has occured - If there is any Ink anywere other than in the Ink Loader or in the Head then you should consider that you have been sold a badly treated machine that may support a number of problems caused by 120 to 150 degreeC Ink slopping about the insides