Hi all, I'm having some trouble making a specific configuration for the storedge 3310, I'm making a script using sccli utility, for my configuration I have to remove all the configuration that storedge comes with by default, but I must do so using sccli. When I remove both host luns I can't acess the storedge device, I already posted this question to portuguese assistant of sun, but it has been more then 3 weeks without a reply.
So tryed using another method, I first remove all the spares that come with the raid 5 default configuration, and I then remove one off the host luns, atfer that I remove the logical drive that was in it, and I was going to do the new configuration, but I stoped on the folowing problem, how can I create a raid0 drive on channel2 using all six disks and then create another raid0 using the remaining 6 disks on channel0, and after that make a mirror of one in to the other?
For the configuration of the raid0 it's easy but the to raid1+0 is what's troubling me:
echo "create logical-drive raid0 2.0-5 primary"|sccli -o -w 10.1.0.100
after that I would create a new lun map using the map command, and then remove all the configuration on channel0 and then create the new configuration
echo "create logical-drive raid0 0.0-5 primary"|sccli -o -w 10.1.0.100
my question is how can I now mirror one to the other?
I really would like to know, I've been thinking about this for some time, but I still haven't found a solution, if someone could please point me what I'm doing wrong, I would really apreciate-it.
Orlando
P.S. Sorry for my bad english
So tryed using another method, I first remove all the spares that come with the raid 5 default configuration, and I then remove one off the host luns, atfer that I remove the logical drive that was in it, and I was going to do the new configuration, but I stoped on the folowing problem, how can I create a raid0 drive on channel2 using all six disks and then create another raid0 using the remaining 6 disks on channel0, and after that make a mirror of one in to the other?
For the configuration of the raid0 it's easy but the to raid1+0 is what's troubling me:
echo "create logical-drive raid0 2.0-5 primary"|sccli -o -w 10.1.0.100
after that I would create a new lun map using the map command, and then remove all the configuration on channel0 and then create the new configuration
echo "create logical-drive raid0 0.0-5 primary"|sccli -o -w 10.1.0.100
my question is how can I now mirror one to the other?
I really would like to know, I've been thinking about this for some time, but I still haven't found a solution, if someone could please point me what I'm doing wrong, I would really apreciate-it.
Orlando
P.S. Sorry for my bad english