3300 programs to activate PMS interface via the ethernet port? 1

[Paulsean48]

I'm using the ethernet port to a switch, then to 2 TCP to Serial adaptors connected to 2 of the PMS octopus serial connections. (VM is external with separate serial connection). New to the 3300, I'm used to 1103 data sets via DNIC ports. What 3300 programs might I need turned on ? Thanks for your assistance !!!!

 

[kwbMitel]

This procedure enables the log applications and ACD Real Time Events streaming to be directed to remote applications. The remote IP application must act as a TCP/IP client.

To view Output Streaming from a remote IP application:

Open a Telnet Session.

Under PORT select the current socket for the information required.

For all ICP controllers except the MXe Server, enter the IP address of the RTC.
For the MXe Server, enter the System IP address.
[tt]
Logs Output Socket Number

Software Logs 1750
Maintenance Logs 1751
SMDR 1752
Hotel Logs 1753
LPR1 (printer port) 1754
ACD Real Time Event 15373


Note: If the TCP/IP connection drops, reconnect the client application. There is a maximum 10 connections to each system application.


Property Management System Programming
Note: You do not need to perform any programming for the voice mail PMS connection.

To program the hotel/motel administration PMS IP connection:

Hotel Options form
- set the Property Management System Installed field to "Yes"
- set the PMS Connectivity field to "Network".

To program the hotel/motel administration PMS RS-232 connection:

System Ports form
assign a port name to the SC5550IP Input port.
assign a port name to the SC5550IP Output port.
Note: The 5550 IP Console must be programmed before these ports will appear in the form.

Application Logical Ports form

assign the Port Physical Names programmed in step 1 to the PMS Input Port and PMS Output Port logical names.

Hotel Options form
set the Property Management System Installed field to "Yes"

set the PMS Connectivity field to Logical Port.

Note: You can change the baud rate of the SC5550 IP Input and Output ports by using the Baud maintenance command.


In the Hotel Options set the PMS option to - Yes


BTW - The 5550 can be used, I think I got it backwards before, that's what I get for posting before looking things up.






**********************************************
What's most important is that you realise ... There is no spoon.

 

[LoopyLou]

I would also say stopping putting in multiple threads on basically the same question.

The single biggest problem with communications is the illusion that it has taken place.