Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
3300 not displaying name
- Thread starter asayani
- Start date
There are many many reasons why this may not be happening.
Very few Telco's will provide a default name outbound and require the PBX to provide the name.
Depending on the hardware and software that you have, you may not be able to send names, may only be able to send desktop names or in a best case, you can send an alternate name via the department field.
To advise you better I need to know:
3300 software revision
Hardware connected to PRI
Telco provider (or country)
*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
Very few Telco's will provide a default name outbound and require the PBX to provide the name.
Depending on the hardware and software that you have, you may not be able to send names, may only be able to send desktop names or in a best case, you can send an alternate name via the department field.
To advise you better I need to know:
3300 software revision
Hardware connected to PRI
Telco provider (or country)
*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
- Status