Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3300 Multi Layer Auto Attendant

Status
Not open for further replies.

Wendelspanswick

Programmer
Jul 1, 2010
35
GB
3300 with embedded VM.
Long shot I know but we have set up the AA for a customer which all works fine apart from the fact that when you press the option you require the AA recorded message says "Transferring you to extension xxx", the customer would rather the caller did not know what the extension number for the different departments are.
Any way of silencing this?
Cheers


Have you tried turning it off then on again!
 
Are you using a menu node mailbox or 1 digit mailboxes/front end greeting to create the auto-att?

If you use a menu node mailbox and give the transer mailbox a name, for example 'accounts', when the option for accounts is pressed it will say 'you are being transfered to accounts'
 
Wonderful, as it was a transfer box I never bothered to initialize the mailbox.
Customer should be happy now.
Thank you.

Have you tried turning it off then on again!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top