Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3300 ICP Voice Mail

Status
Not open for further replies.
Feb 21, 2013
32
US
I bought a used 3300ICP with the passwords to let me program stations, trunks, COS and so forth. I can setup and remove voice mail accounts for the few phones. I did not get the password for the VMX administrators station and I don't feel like going from 0001 to 9999 and hope I get lucky. Is there a way to erase all the VMX data and start over? I won't have more than 8 or 10 phones so it won't be a problem to put them in.
 
Try 9731

**********************************************
What's most important is that you realise ... There is no spoon.
 
If you start at 9999 and work down, something might happen on your 269th attempt

**********************************************
What's most important is that you realise ... There is no spoon.
 
Damn smart phones, I didn't think that first one was there
I decided to be more circumspect but obviously to late

**********************************************
What's most important is that you realise ... There is no spoon.
 
Thanks everyone. I tried the suggestions and numbers close to those but it didn't work.

I can access the disc structure with a serial cable on the maint port and have gotten to the /vmail directory. Is there a way to delete all the mail boxes and just start over?

Thanks again

Ken
 
Use an FTP client and go to /vmail/c/vm, then copy the file parm.bin

Open using notepad and you will see 3 x 4 digit numbers, these will be the admin, manager and technician level passcodes for the admin mailbox (9999)

There is an option to 'erase the current setup and configure a new installation' when you enter the admin mailbox

 
Thanks to Mr Itel and kwbmitel. I found the parm.bin file, made a copy and deleted the original. Then I was able to use password suggested by kwbmitel and get control of the voicemail.

Thanks again.

Ken
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top