3300 ICP ring group question

[whosrdaddy]

Hi all,

I have a 3300 ICP with ISDN BRI module.

I have 2 did numbers that must call a group of 2 IP DECTS.
I set this up with 2 ring groups containing both DECTS. this works fine but I have one problem, I don't see the A-number when a call comes in but the ring group number, A-number is shown when the call is answered.
tried the setup with multicall on the dects, but then I get an anoying beep-beep when the DECT is busy and the second line rings.

how can I solve this problem?

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Lundah]

Sounds like you have 2 COS options that need to be changed. On the number display, try changing "Display Held Call ID on Transfer" to Yes. On the tone, enable "Camp-on Tone Security", also in COS.

 

[whosrdaddy]

already set those, doesn't change a thing...

any other ideas?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[whosrdaddy]

Lundah, from what i've seen, those COS options don't have influence on IP devices (like my dects)

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[whosrdaddy]

anyone?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[whosrdaddy]

Ok,
Is there a possibility to avoid the beeping on the DECTS with 2 Multicalls when Busy?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[kwbMitel]

I think you have a dry well on this one.

First, the Dect's are in very limited use.

Second, Ring Groups are relatively new.

Multicalls are designed to deliver Call Waiting beep over the speaker of normal sets and obviously this has been written to beep in the ear on the Dect.

All I can say is good luck.



*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[whosrdaddy]

Thing is, the call waiting tone was not there in V6 - I feel stupid...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!