Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3300 ICP 7.1 CXi Chassis replacement no POE

Status
Not open for further replies.

TLDuk

Programmer
Nov 11, 2004
656
GB
I was sent out to replace a CXi chassis running ICP 7.1 but after swapping it out, the L2 switch provides no power or network connectivity if I am connected to the LAN port I can ping the L2 ip address this is the second chassis that has been tried i`m thinking the previous software was much newer and can L2 will not run on 7.1 anyone else come across this ?

BTW I have tried UpgradeBootrom ALL as suggested else where on the forum

If its not broke tweak it..
 
does it have an ip address programmed for the switch

pretty sure thats saved on the hardware not in the backup

If I never did anything I'd never done before , I'd never do anything.....

 
you mean in ESM ? if so yes and i can ping it also

If its not broke tweak it..
 
Just done a manual software install to ICP7.1 and the system spent quite some time flashing new software to the L2 switch and it is working now must be a process only done during fresh install or software upgrades the system was at MCD4.2

If its not broke tweak it..
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top