3300 default values

[zodiacgam]

I have an old 3300 CX running on ICP 8.0. I want to run VxWorks to default it without
booting from the windows Server root file. What value should I put for the VXworks parameters as a default . In this case
I have the following
boot device ata=0,00
proc Number 0
Host name : boothost
file name : Dev_RTC8260
(skipped)
user : ftp
pw: ftp

other: motfcc

Reboot with @

returns "loading error..."

( note: firewall disabled )

 

[sarond]

Not sure your file name parameter looks right.
Try changing to [tt]/partition1/RTC8260[/tt] if that doesn't work try [tt]/partition4/RTC8260[/tt]

 

[Billz66]

use cd to reset all paramaters back to their defaults

If I never did anything I'd never done before , I'd never do anything.....

 

[kwbMitel]

@Billz66

use cd to reset all paramaters back to their defaults

Are you f'ing kidding me?

**********************************************
What's most important is that you realise ... There is no spoon.

 

[Billz66]

nope on console after space space space enter cd


I think its in tech handbook

If I never did anything I'd never done before , I'd never do anything.....

 

[Billz66]

Couldnt find it in the manuals but someone else had posted this on a different forum


@ - boot (load and go)
p - print boot params
c - change boot params
[highlight #FCE94F] cd - change boot params to default[/highlight]
cv [vlan] - change VLAN ID, empty value clears
the VLAN info.


If I never did anything I'd never done before , I'd never do anything.....