3300 and DNIS

[bearvalley]

On an incoming DDI call (PRI)this call gets passed directly down a DPNSS link. I want to pass the actual Dialled DDI digits and not the CLI.

Any help very much appreciated

Thanks

 

[kwbMitel]

Check the following COS Options

Display ANI/ISDN Calling Number Only

Select "Yes" to display only ANI information. Select "No" to display DNIS digits when the set is called, and ANI digits once the call is answered.
This field is specific to display telephones and attendant consoles that provide ANI/DNIS information.


Display ANI/DNIS/ISDN Calling/Called Number

Select "Yes" to display ANI and DNIS information on Mitel display telephones and attendant consoles. Select "No" to inhibit the display of information. The ANI/DNIS feature must be enabled.
Note: Mitel display telephones cannot display both ANI and DNIS information concurrently.


Display Caller ID on Multicall/Keylines
Select "Yes" to display calling line identification on multicall and keyline appearances of directory numbers for SUPERSET display telephones and SUPERCONSOLE 1000 and 5550 IP attendant consoles. Select "No" and no information is displayed.


Display DNIS/Called Number Before Digit Modification

Select "Yes" to send DNIS information (without digit modification) to a DID trunk programmed as an ANI/DNIS delivery trunk. Select "No" and DNIS digits are displayed in their modified form.
The display of DNIS information at a set or console is controlled by the Display ANI/DNIS/ISDN Calling/Called Number and Display ANI/ISDN Calling Number Only COS options.