Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3 servers 1 tape library 2

Status
Not open for further replies.

LMarie

MIS
Oct 1, 2007
10
US
Ok here's my dilema. I currently have 3 ARCSERVE 11.5 servers, all 3 are used for D2D, only 1 has the tape library. I was told by the CA rep, that i would be able to do D2D2T from the 2 that do not have the library. I have not been able to figure out how to do this as of yet. I also have not found any documentation to support this. Can it be done, and if so how?
TIA,
LMarie
 
sorry LMarie, the CA rep was wrong. As far as I know this cannot be done
 
It can in fact be done via tapecopy.exe.
tapecopy supports FSD (File System Devices) as tape and remote servers.
 
David is right about using tapecopy. I guess you would like to consolidate all three FSD backups to one single tape or tapeset on the tapelibrary.
Go to Appendix B (or C) on the ARCserve 11.5 Administrator Guide and find out if tapecopy can accompish this,

regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top