3 lim md110 system

[Anilrajat]

hi folks

i have in my customer base 3 lim MD110 system, while dumping it is waiting only at point of GPP unit process.

and dusyi:dump=all; is not going to complete.

any one can help me on this.its out of my memory.

regrads
ak

 

[jetsz2013]

try the command dusyirint=result;
if it isnt successful may be lim 3 is out of order so print synchronization and group switch if it is used

 

[himdp]

I think a print of the alarms should give you a good indication of whether the lim is out of order
An allop might also give you clues as to why the dump is failing; disk space for example.

 

[parnum]

GPP is the most common unit to lock up. Try restarting GPP in all Lims. It is either locked up or you may have corruption...

Best parnum

 

[Anilrajat]

hi parnum

restarted GPP program unit and system dumping is started ahead but at last getting error buffer transfer error in lim 3.
i have restarted gsm & lim3 also but error is same only.

Regards
Anilrajat

 

[snor]

Hi,
I had same problem in the past.
1.) Problem can be based on INM (loaded in one LIM)and INR (all LIM)
Restart this units and try dumping again.
2.) Restart LIM 1 might solve the problem.
(You will loose all changes since last dump.)
best regards,
Norbert

 

[parnum]

you haave 2 RELS, is one valid? have you done FIFTI on the RELs to try and fix? If one is invalid try FICRI on it if FIFTI fails - don't FICRI the valid REL!

best parnum