Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3.2(54) When dialing 9 will not dial out.

Status
Not open for further replies.

ipxman

Technical User
Apr 18, 2006
11
US
I just upgrade a 406 v2 from 3.2(17) to 3.2(54) for voice mail issues. Now if a call is ring into the receptions, and a system phone trys to dial out. When you hit 9 nothing happens. You have to wait for the call to be answered by the receptions. Then dialing 9 you get and outside line. I have two companys on the system with one receptions . There are 10 in and out analog trunks. This problem didn't start happening unil I did the upgrade.
 
When you pick up the handset or hit the speaker button. You get the incoming call instead of the receptions.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top