has anyone experienced 3.1 rebooting issues. we have just installed a 406 v2 with 2-dig30 and 1-analog 30 and 1-pots trunk, and the system after setting out all 60-70 phones has started rebooting on it's own, the stations were set up one by one with no problmem, but after people were on the phones and the load was up the problem started any info on 3.1 would be great if anyone experienced the same problem
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
3.1 Rebooting
- Thread starter alfalfa
- Start date
Was it rebooting after paging? We've had problems when the receptionist pages everyone (dialdirect to group). After she hangs up, about 1 in 6 times the system reboots. We've narrowed down that she can page all the digital phones without problem, and all the IP phones without problem, but when paging both at the same time the reboot 'might' occur.
Our local reps have a ticket open with Avaya at the moment.
For the time being I've setup a voicemail module that records a wav file from the handset, then does a page to one group of phones then to the other and plays the wav. Seems to be working.
Our local reps have a ticket open with Avaya at the moment.
For the time being I've setup a voicemail module that records a wav file from the handset, then does a page to one group of phones then to the other and plays the wav. Seems to be working.
- Status