I have (2) consoles that are on the same opt11c. anum 1 and anum 2. When anum 2 get's out of busy mode the led blinks instead of ringing. I noticed that they are on the same card in shelf 0. I was under the impression that you could only have 1 console per card and no other phones on there as well. Could that be the problem or maybe a timers issue? They said it was working just the other day and now it isn't. I did verify that it only blinks and doesn't ring. They both have power as well. Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
2nd console not ringing
- Thread starter lopeztcom
- Start date
- Thread starter
- #2
- Thread starter
- #3
The console takes a tremendous amount of processing power and one card is simply not enough horsepower to run two consoles - That is the solution...One console per card.
[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too
[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too
- Thread starter
- #5
- Thread starter
- #6
- Thread starter
- #7
- Status
Similar threads
- Locked
- Question
- Locked
- Question