Just got done setting up a 5610 dect stand and phone on 3300 running mcd version 6.0 sp 3. The first phone works great. The problem is the second phone (tried 2) won't register. Anyone run into this. I believe firmware on dect is 2.0. Tried the reset and adding ipei. Nothing works any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
2nd 5610 deft phone won't register
- Thread starter SNIP81
- Start date
- Thread starter
- #3
yes, the secound account between the base and 3300 works fine. the problem is I can't get the second hanset to register with the base. The very first phone registered fine. The next two I try to register will not. They flash contacting gateway. 2 bad phones? bad base station?
- Status
Similar threads
- Locked
- Question
- Locked
- Question