Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

2926T, I could not enter in CatOS, it only display error

Status
Not open for further replies.

victorjob

Technical User
Apr 27, 2003
33
HK
How can I upgrade my 2926T ? when I upgrade the image of cat5000-sup.4-5- 13a, it will be corrupted and display
following error. How should I downgrade to baseOS and upgrade my 2926T. As I could not enter in CatOS, it only
display the errors.

Thanks of lot!



Sry r gi.



ATE0
ATS0=1



ROM Power Up Diagnostics of Aug 19 1997

Init NVRAM Log
LED Test ................... done
ROM Checksum ............... passed
Dual Port RAM r/w Test ..... passed
ID PROM .................... passed
System DRAM Size(mb) ....... 16
DRAM Data Bus Test ......... passed
DRAM Address Test .......... passed
DRAM Byte/Word Access Test .. passed
EARL Test .................. passed


BOOTROM Version 2.4(1), Dated Aug 19 1997 11:00:58
BOOT date: 05/05/03 BOOT time: 08:33:13
Uncompressing NMP image. This will take a minute...
CsoSsesCnoe




20 a 50:35 SS5MDO:eek:ue1i nie
20 a 50:41 SS5MDO:eek:ue2i nie
20 a 50:41 PG--OTOT:eek:t11ji
Atmtclgu..
Etrpswr:.trpswr:Etrpswr:Etrpswr:Etrpswr:Etrpswr

 
I would like you to make sure you are using the correct image. Image to be used in the 2926 is the same one used by supervisor I or II. The problem is that the image for supervisor III has the same name. If you have access to CCO try the Catalyst 5000 Flash.

By the way, do you have any other 2926 up and running? Could you upload the IOS to a TFTP server? If you could do that we are saved. If you have a 2926 but can not upload, just post a sh version (or equivalent) and sh flash commands.

If anybody else has a 2926 up and running would you, please, post a sh version (or equivalent) and sh flash commands. I would like to check the file size with CCO.

 
Thank you very much for fmonteiro.

Who have the Cat2926T to sh version or flash? As I saw many images on CCO for 5000/2926T, Which should I take?
How can I upload the new image or delete the error image
again?
As I only saw the following unrecognized messeages in 2926T's concole port.
----------------------------------------------------
Uncompressing NMP image. This will take a minute...
CsoSsesCnoe




20 a 50:35 SS5MDO:eek:ue1i nie
20 a 50:41 SS5MDO:eek:ue2i nie
20 a 50:41 PG--OTOT:eek:t11ji
Atmtclgu..
Etrpswr:.trpswr:Etrpswr:Etrpswr:Etrpswr:Etrpswr
-------------------------------------------------------



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top