Does anyone know if this is possible using a 2621 Router?<br><br>I need to set up a VPN server in a private network which is using NAT to access the Internet. I'm trying to create a static NAT translation on TCP port 1723 (port that PPTP protocol uses) which will allow me to run a VPN server in my private network but will still be accessible accross the Internet via my public IP address. This is similar to setting up an FTP server within my private network which is accessible to the Internet. I was able to accomplish that last week thanks to the people in this forum. <br><br>Currently I have set up RAS on a server, in my private network, to act as a VPN server. I can connect to it within my network so I know it works. I have configured a static NAT translation from the global IP to the private IP for TCP port 1723. I have set up my firewall to accept TCP packets on port 1723 and also for GRE packets which are IP 47 packets. No luck though. I'm attempting this so that I don't have to spend money on extra routers and IOS upgrades (IPSec) to create a VPN like Cisco recommends. If anyone can tell me how to accomplish this it would be great. If it's not possible, is there any other cheaper solution?<br><br>Thanks,<br>Niall