2616 at home

[dawg2]

i have an opt 61C, I have a trader that would like to have his directs and an offie phone with ext and intercom at his home. I have ordered an OPX but I think I need something more so that I can complete this project. Please help me with knowledge , programming, devices if needed and possible where I could get one.

Thank you

 

[njphones]

What about an i2050 soft phone?
Check one out here:

http://products.nortel.com/go/product_content.jsp?parId=0&segId=0&catId=I&prod_id=24043

 

[PERRYPJ]

Check the MCK Extender, works with ISDN_BRI

http://www.atlasphones.com/mckex30foris1.html

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[CTarv]

I'll second the MCK extender. Very easy to setup. As long as your extender hardware doesn't fry (happens rarely), it lasts for a good long time. Very tolerant of latency and dips in bandwidth.

We have a IP capable CS1000M that has both softphones and 1140Es running off it, but those MCK phones we rolled out before we were IP enabled on the switch are the least called about with issues.

 

[DocVic]

We have been using the MCK for "years". Bullet proof! Only one failed when hit with a direct lighting strike. Burned down the garage/office. Now that's a failure! Insurance paid for a 4 car with 1500 ft office above. Cool!

DocVic
Dedicated to Nortel Products till the end.
Need help? Call Me Now!

 

[dawg2]

Thank you for the information so far! Would the mck/citel 1000 work with a OPX? I have ordered a OPX from here to myclients home. IS there anywhere I could find techinical and program assistants with this product?

 

[PERRYPJ]

You would have to order ISDN-BRI for the user, MCK has always been good about Tech support

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[dawg2]

Hello again! Thank you for the device. I did locate a mck 1000 unit remote and switch side. It did not come with any install manuals and information. I called Citel and they say the SN I have are wrong but that is what I have. I need to set up on a analog line. I need to get this installed ASAP if any one can help me I would greatly appreciate it.
Thanks

 

[Reusser]

http://www.retrevo.com/support/Citel-1000-PBX-manual/id/21360ci855/t/2/