2610 w/ 4 T1s?

[Motopsycho]

Has anyone ever ran a Cisco 2610 with 4 T1s with MLPPP? If so, have you had any problems with the processing engine of the 2610? I'm trying to decide if I can use my existing 2610 with 2 T1s and add an additional 2 T1s as opposed to using a 2651XM.

 

[JOAMON]

You may want to consider the 2691 or the 3800 series. I do not think the 2610 would be a good choice for that configuration. The 2651XM might be ok. See quote below:

"The highest performing router in the Cisco 2600 family that extends the density of emerging branch office applications, the Cisco 2691 offers almost twice the performance of the Cisco 2650XM platform while leveraging the same modules from other Cisco 2600, Cisco 3600 and Cisco 3700 Series routers."

 

[plshlpme]

we have acouple 2651s with two t1s over mpls... only customer routes and the processor hits 60% once in a while
im pretty sure 4 T1s with any substantial load will be to much..

 

[Motopsycho]

How about an 1841? Does anyone know if that can handle multiple T1s?