Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
2400IMX and DTH 4R-2 compaible
- Thread starter grh959
- Start date
belevedere
Instructor
That is hard to say given the various firmware versions of the circuit cards. The best answer is if you already have one, try it.
phone_troll
Programmer
Cordless II (DTR) and Cordless Lite II (DTH) are supported
when directly connected to a Digital station blade or when
connected to the Series E (DTR) or IPK (DTH) terminal.
I show that SPA-16ELCJB-D is compatible with the DTH-4R-2.
I've attached a snapshot of an old compatibility chart and also the full .PDF
Oh -- BTW, I emailed you a while back from an ancient forum post as I was looking for advice on my IMX and dongle issue. Belevedere helped out, though.
when directly connected to a Digital station blade or when
connected to the Series E (DTR) or IPK (DTH) terminal.
I show that SPA-16ELCJB-D is compatible with the DTH-4R-2.
I've attached a snapshot of an old compatibility chart and also the full .PDF
Oh -- BTW, I emailed you a while back from an ancient forum post as I was looking for advice on my IMX and dongle issue. Belevedere helped out, though.
- Thread starter
- #4
Thanks for the quick responses!
I opted for the dtr model .
Sorry for missing your request troll. My network duties have overshadowed my PBX passion. Just off the top of my head I don’t think the IMX uses dongle that used on previous ICS. Someone please correct me if I am wrong
I opted for the dtr model .
Sorry for missing your request troll. My network duties have overshadowed my PBX passion. Just off the top of my head I don’t think the IMX uses dongle that used on previous ICS. Someone please correct me if I am wrong
phone_troll
Programmer
No worries grh959 -- my email very well may have been about the ICS. It's been a while, so I forget, and I found the bypass util. Funny thing is, I needed it for NEC engineer. They lost the the app long ago since they no longer officially supported the system, outside of what they were able to do.
- Status
