2400 IPX PRI or T1 Programming 1

[d2cslane2]

Hi all,
Have a 2400IPX, can the switch be set up to route incoming calls to a PRI spanning from the 2400IPX to a CommPlete
communications server. CommPlete device is now fed by a Verizon provided PRI and does not come through the PBX. Want to elminate the cost of Verizon PRI. I also have a spare T1 card if that would be easier to setup. Any insight will be helpful.

Thanks, Darrel

 

[3racefan3]

If the Commplete server has a T-1 card you should be able to use your T-1 card set up as a digital tie-line. I have done this with fax servers. Set up the incoming digits to route over a to the new route built for the digital tie-line and allow route to route.