Trying to program a station number into a 2400 IPX. ASDT gives the error message: Station Cannot be Assigned. Double Assignment. DSTN gives the same error message. The station does not appear in the Lens print out. I ran the command to show all appearances of the phone number on any station. I believe this was LMLA4 or something similar. It pulls up four stations but this number is not actually programmed on any of them. I checked ASPA but the digits I am using for the numbers are only assigned for stations in this building. No routes or anything like that are using them.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
2400 IPX Ghost Station Number
- Thread starter bengi1234
- Start date
belevedere
Instructor
If you have ACD it may be in AMNO as a monitored number.
- Thread starter
- #4
Thank you! It was a phantom! I found it by systematically deleting every phone that appeared to have a connection to it. They all had line appearances of the number that had the phantom assigned, and when I got to that one, I found the phantom! LPHN would have been easier ...
- Status
Similar threads
