2400 IPX DND check

[Switchroom]

Is there a MAT command or other way to check if a station has DND (FKY 50) set?

DCON shows the station as Idle, MBST shows it as 0, and in a DND state the station's Line Appearance doesn't light on another DTerm.

I know if I call the station in DND I'll get a busy signal, but if the station isn't in DND I don't want to alert the person in the Pilot Hunt Group I'm checking to see if they're sitting there with their DND on, ignoring calls.

 

[belevedere]

Try DSTN

 

[Switchroom]

Thanks for the response, but I must be missing something. DSTN can show me if I have a the DND button programmed on the particular station (AKYD), but where does it show me if that station is actually in a DND state?

 

[belevedere]

Your only solution may be to change ASYD so it either shows DND or roll to another extension.