I have a 3.0 opt 11c with a 2250 console on it. the customer is requesting to setup the 2250 to give them a held reminder buzz/tone after 30 secs of a call being placed on hold at the 2250. I have looked in the options menu on the 2250 but cant find anything...any help would be greatly appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
2250 console on hold reminder
- Thread starter fgibson
- Start date
Your ATT timers are located in the CDB. Take a look and see which ones you want to change. Be careful. Test one change at a time and be sure not to make a system wide change.
DocVic
Dedicated to Nortel Products till the end.
Need help? Call Me Now!
DocVic
Dedicated to Nortel Products till the end.
Need help? Call Me Now!
- Thread starter
- #3
There isn't an On Hold Reminder for the console.
[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too
[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too
- Status
Similar threads
- Locked
- Question