Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

2250 Att Console not showing CLI & CND

Status
Not open for further replies.

pointedout

Technical User
Apr 6, 2010
45
PK
I have configured Attendant console 2250 in my CS1000E. Issue is that every set in the system is showing CLI however, Attendant console is not. Please help.
 

First you could check and print your ATT Data in that CustomerDataBlock (CDB)

LD 21
REQ PRT
TYPE ATT
CUST X

In the Options 'OPT' prompt you may want to change XDP to IDP 'Include Digit Display'

LD 15
REQ CHG
ATT (Return to prompt)
OPT IDP (Return)

Try that first

Cheers !!
 
Done that... Thanks, I can have CLI now. Just one more question, I am unable to send my console CLI on external number. What might be the possible reason?

Thanks for the kind anticipation.
 
That would be your CLID setting
LD 21
REQ PRT
TYPE CLID (Return)

Will see what you have ?

Cheers!!
 
That would be my print. Where to change it? LD 16?
 
Yep but remember that depends on whether your CO allows this
as they may have reserved your main number on all calls presming its PRI ?

Have a look at many posts on CLID to help you via Keyword Search

Cheers!!
 
Issue is that when I dial my mobile number from ordinary extension 29111, CLI on my mobile is received as 0811829111. However, when I dial from my Console, CLI is received as 08118. My CLI has DN 2919. What might be the issue?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top