Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

2245 help

Status
Not open for further replies.

DigitalG

Technical User
Mar 11, 2005
430
CA
I got a brand new telephony manager 2245, i was able to configure it but i made an error on ip config.now when it boots up i get this message :

Init
Starting Network
Ethernet Address:
Booting
Network is Up
Continuing normal boot test flash append ...
flash append Ok
No IP configuration
Starting DHCP
IP Configuration:
address: 192.168.2.51
subnet: 255.255.255.0
gateway: 192.168.2.2
TFTP server: 192.168.2.2
boot file: SVP100.toc
Getting TOC file "Nortel/SVP100.toc"
Nortel/SVP100.toc: Nortel/SVP100.toc: Nortel/SVP100.toc:
Nortel/SVP100.toc: Nortel/SVP100.toc:


No TOC file found. Using TOC from flash
no TOC in flash.
enter IP address and TFTP server IP address:
IP:
Enter an IP address. For example: 192.168.23.7
IP:




I looked in the NTPs and didnt found how to reset to factory default.Need help thanks
 
i downloaded from the site now for me its working...if u want more deatils send a message
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top