I got a brand new telephony manager 2245, i was able to configure it but i made an error on ip config.now when it boots up i get this message :
Init
Starting Network
Ethernet Address:
Booting
Network is Up
Continuing normal boot test flash append ...
flash append Ok
No IP configuration
Starting DHCP
IP Configuration:
address: 192.168.2.51
subnet: 255.255.255.0
gateway: 192.168.2.2
TFTP server: 192.168.2.2
boot file: SVP100.toc
Getting TOC file "Nortel/SVP100.toc"
Nortel/SVP100.toc: Nortel/SVP100.toc: Nortel/SVP100.toc:
Nortel/SVP100.toc: Nortel/SVP100.toc:
No TOC file found. Using TOC from flash
no TOC in flash.
enter IP address and TFTP server IP address:
IP:
Enter an IP address. For example: 192.168.23.7
IP:
I looked in the NTPs and didnt found how to reset to factory default.Need help thanks
Init
Starting Network
Ethernet Address:
Booting
Network is Up
Continuing normal boot test flash append ...
flash append Ok
No IP configuration
Starting DHCP
IP Configuration:
address: 192.168.2.51
subnet: 255.255.255.0
gateway: 192.168.2.2
TFTP server: 192.168.2.2
boot file: SVP100.toc
Getting TOC file "Nortel/SVP100.toc"
Nortel/SVP100.toc: Nortel/SVP100.toc: Nortel/SVP100.toc:
Nortel/SVP100.toc: Nortel/SVP100.toc:
No TOC file found. Using TOC from flash
no TOC in flash.
enter IP address and TFTP server IP address:
IP:
Enter an IP address. For example: 192.168.23.7
IP:
I looked in the NTPs and didnt found how to reset to factory default.Need help thanks