I am STUMPED!
Here is the configuration.
Site A has a BCM50 connected to a contvity 221 which is connected to DSL internet. Site A also has one IP 2004 handset that is up and running.
Site B is a remote location with DSL and a IP2004 handset connected to a contivity 221. There is a Branch office VPn setup between Site A 221 and Site B 221.
The IP2004 at the remote site can call any digital phone at site A without issue. It works great, however this same IP phone cannot call the one IP phone at Site A. The phone will ring, and then there is NO speech at all.
From Site B we are able to ping the BCM at Site A, however not the handset itself.
Any ideas what setting on either the 221's or the BCM I am missing??
Here is the configuration.
Site A has a BCM50 connected to a contvity 221 which is connected to DSL internet. Site A also has one IP 2004 handset that is up and running.
Site B is a remote location with DSL and a IP2004 handset connected to a contivity 221. There is a Branch office VPn setup between Site A 221 and Site B 221.
The IP2004 at the remote site can call any digital phone at site A without issue. It works great, however this same IP phone cannot call the one IP phone at Site A. The phone will ring, and then there is NO speech at all.
From Site B we are able to ping the BCM at Site A, however not the handset itself.
Any ideas what setting on either the 221's or the BCM I am missing??