Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

2112 set?

Status
Not open for further replies.

listhist

MIS
Feb 26, 2004
130
CA
What activates the speaker on a 2112 set, does it need power? I assume handsfree is not a programmable option although the speaker doesn't work when the set is on hook.

thanks
 
Hello,
it is a long time ago, as far as i remember, 2112 does not have handsfree the same set which is called 2312, does have handsfree and will need power. Very old stuff!!!!!!!
 
I beleive you need power. It should be a little black power box with screw down terminals. Use cross connect from screw downs to back of jack I think third pair.
 
correct on the power, and with power and hfa in the class it will hands free, you must be working at a museum, that's an old phone.

john poole
bellsouth business
columbia,sc
 
oh come on, it's not that old :)

I can't put HFA in CLS, I get sch0345: class of service not allowed.

On the 2112 set when I press the 00 key with the handset on-hook, I get an indicator that it is off hook and also the handsfree indicator illuminates but the speaker doesn't work.
 
do you have a power supply plugged in?.. if the speaker don't work even for out dialing then the phone or the ps are bad. you get dt on a station even with hfd. i didn't remember if hfa was programable, so the power supply supply should give you mech. speaker phone. same as a analog speaker phone, more of a function of the set as opposed to the software. i went to school the 1st time when rls 4 was new, 2112's were on the drawing board and my kids didn't have grandchildren... i'm old, the phones a little newer

john poole
bellsouth business
columbia,sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top