2050PC Caller ID

[np247]

Good morning all, new to this, so please bare with me.
I have a 1120 and 2050PC configured for the same DN. When users call me, on the 1120 I see the caller ID. On the 2050PC, everyone comes up as "NO NAME" -- any idea why?

(Second, less important question -- I have a direct line that points to my extension. When I call from the 1120 it shows as my direct line. When I call from my 2050PC, it shows the main office number).

TN 252 0 0 00
DATE
PAGE
DES

DES 1920
TN 252 0 00 00 VIRTUAL
TYPE 2050PC
CDEN 8D
CTYP XDLC
CUST 0
NUID
NHTN
CFG_ZONE 010
CUR_ZONE 010
ERL 0
ECL 0
FDN 7000
TGAR 1
LDN NO
NCOS 4
SGRP 0
RNPG 0
SCI 0
SSU
XLST
CLS CTD FBD WTA LPR MTD FNA HTA TDD HFA CRPD
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD SLKD CCSD SWD LND CNDD
CFTD SFD MRD DDV CNIA CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBA AUTU
GPUD DPUD DNDD CFXA ARHD FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN
VOLA VOUD CDMR ICRD MCDD T87D KEM3 MSNV FRA PKCH
CPND_LANG ENG
RCO 0
HUNT 7000
LHK 0
PLEV 02
DANI NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 MCR 1920 0
CPND
NAME Super Man
XPLN 11
DISPLAY_FMT FIRST,LAST
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17 TRN
18 AO6
19 CFW 16
20 RGA
21 PRK
22 RNP
23
24 PRS
25 CHG
26 CPN
27
28
29
30
31

Thanks!

 

[np247]

Well, apparently the obvious CNDD to CNDA fixed some things .
Also, CLBA/CLBD.

Stupid Tuesdays.

Thanks all!

 

[Tman45]

For your 2nd part of the question - on your 2050 build you must have the same CLID entry as your 1120 phone DN to have the DID broadcast. 0 is usually the main office number. We use 1 for our main DIDs.

So for Key 0 SCR 1920 1 (you need to put the 1 after the extension entry like this) unless your IDC for DIDs is a different DCNO table. We have several. You should just match whatever your 1120 is using.