2000IVS SMDR ISSUES

[Waklogs]

I have two 2000IVS systems linked with CCIS. I have the remote system sending the SMDR records to the main system AP0 card.
The main system SMDR comes out port 0 and the remote out port 1 of the AP0 card.
The problem I am having is the remote system SMDR comes out 3 times for each call.
1) When you first dial out and you get ring tone, it sends out a 0 minute record with no Auth. code.
2) Then it sends out a 0 minute record with the full dialed number and the auth. code but duration still 0 minutes.
3) Finally when the call is finished it sends out another record with the correct duration but dailed number is moved on the record and there is no auth. code again.
I have copied the record for one call to show what I mean:
0!KA0080110019044 07232329130723232913 00100000800813175551212 0000 08080
0!KA0300760019044 07232329130723232913 0010000300308813175551212 0000 409324 08080
0!KA0080110019044 07232329130723233050 00110000800813175551212 0000 08080
If someone has any idea on what is happening I would appreciate the feedback.
Thanks a lot.

 

[LDthirtytwo]

Check out the IVS CCIS System manual

 

[Waklogs]

Thanks, I do have a 2000IPS CCIS manual which I have been through. But I must have something I don't understand as I am not getting this issue resolved. Has anybody run into this before that could point me in the right direction?
Pretty desperate at this point.