Oct 17, 2011 #1 jsaad IS-IT--Management Jun 20, 2002 1,410 US I found an 200EL LS 19 with C on the MCC. All phones down. I rebooted the system and it came back. Just curious why the system would show C as if it was stuck in a reboot? Any ideas?
I found an 200EL LS 19 with C on the MCC. All phones down. I rebooted the system and it came back. Just curious why the system would show C as if it was stuck in a reboot? Any ideas?
Oct 18, 2011 #2 pandabear1 Technical User Oct 14, 2004 887 CA from the docs: C • Faulty Flash memory or Main Control Card. Upvote 0 Downvote
Oct 19, 2011 #3 kwbMitel Technical User Oct 11, 2005 11,505 CA C is the last step during reboot before the system comes up. I've always thought of it as the load Config step. It follows the H that I remember as standing for Heuristics. ********************************************** What's most important is that you realise ... There is no spoon. Upvote 0 Downvote
C is the last step during reboot before the system comes up. I've always thought of it as the load Config step. It follows the H that I remember as standing for Heuristics. ********************************************** What's most important is that you realise ... There is no spoon.
Oct 19, 2011 Thread starter #4 jsaad IS-IT--Management Jun 20, 2002 1,410 US system rebooted ok. made a fresh backup. thanks for the advice. Upvote 0 Downvote
Oct 19, 2011 #5 pandabear1 Technical User Oct 14, 2004 887 CA I thought your MCC was stuck on C Upvote 0 Downvote
Oct 19, 2011 Thread starter #6 jsaad IS-IT--Management Jun 20, 2002 1,410 US yes, it was stuck on C. it rebooted just fine. i've never seen it before, hope to never see it again! anyone know how to re-flash a PRI card? Upvote 0 Downvote
yes, it was stuck on C. it rebooted just fine. i've never seen it before, hope to never see it again! anyone know how to re-flash a PRI card?