2 Servers 1 Public IP

[RJ45100BT]

Okay,


I have a PIX515e

1 Public address left for my client

.188 for giggles


1 server on inside is WWW
1 server on DMZ is FTP

(another DMZ port to internal PIX-PIX VPN)

Now, the outside is privately addressed to clients segment of a point-point circuit.

On their Firewall, they only allow ANY from .188 through,

So I need Inside 10.30.30.x/24 and DMZ 10.30.40.x/24
To look like the same IP on the outside. (.188)


But I also need to port redirect from the outside in to allow www. to go to the inside and ftp. to go to the dMZ.


FUN


HELP !

 

[haknwak]

I don't think that can be done. I may be wrong but ...
I'd consider combining services so that one IP is, say

http://WWW AND

FTP or some such.

you could remove an address from a global outbound NAT pool and statc it to the server.

"If you lived here, you'd be home by now!"

George Carlin

 

[sfrank8734]

Does this page help?

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094aad.shtml