Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

2 phones in 1 time zone, 3 phones in another time zone

Status
Not open for further replies.

cknipe

MIS
Jul 28, 2005
597
US
A while back I asked this questions and the only response I got was that you can have phones show different times for the timezone that they are in if they are connected over mitel border gateway. Has anything with this changed? Can you use tenanting yet to assign some users 1 time zone and some users in a seperate time zone on a 3300 Mxe running 4.2 sp1
 
Last I heard, this is not currently possible without a MBG.

**********************************************
What's most important is that you realise ... There is no spoon.
 
I may be wrong, but I believe if you have a local controller for the phones to connect to, that this could control the time zones as well.

I dp know it's possible with a MBG.
 
Yes, if you have a controller / timezone then the controller time will prevail but I do not understand that to be the case in this instance.

**********************************************
What's most important is that you realise ... There is no spoon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top