I have site A and site B. When site B is placed in night mode, calls from site A over the TIE line go to the attendant phone at site B instead of the extension intended. Any ideas as to how to fix this are greatly appreciated. The TIE is the typical E&M wink/wink T1.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
2 networked legends
- Thread starter hicom
- Start date
- Thread starter
- #3
It either has something to do with Night service exclusion or Remote access allowed on the Tie lines.
System programming
Lines and trunks
Remote access
Barrier tie and non tie barrier codes.
I forget the entries, however, they must be unrestricted for the tie lines.
Netcon1
System programming
Lines and trunks
Remote access
Barrier tie and non tie barrier codes.
I forget the entries, however, they must be unrestricted for the tie lines.
Netcon1
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question